Summary
192in thread clear annodized UniRac Rail. Bundle of 8 rails .Add Aesthetics to the Benefits of PV Power. With your array in full
view, the sunshine rule applies: it has to look good. SunFrame delivers
the visual appeal you and your neighbors expect.
To be sure, the
mounting system provides structural integrity for your array. Properly
installed, SunFrame complies with the Uniform and California Building
Codes. It also meets UniRac’s own high standard of installation
friendliness, both initially and whenever modules need replacement.
But
it is aesthetics that truly sets SunFrame apart. It’s the only PV
module mounting system designed from the outset to enhance the
appearance of the home. A completed installation blends handsomely into
the roof, becoming as much a part of the house as a skylight.
Description
- Inter-Module Rails provide support shelves for the modules.
Depending on a module’s thickness, its upper surface can be as little
as 2.125 inches above the roof.
- Full Length Cap Strips secure
modules and finish the array topside forming a gap-free frame.
Selfdrilling screws at 16-inch intervals provide the holding power.
- End Caps finish the rail ends to complete the frame.
- L-Feet
attach directly through asphalt shingle roofs and support the rails
one-half to three-quarters of an inch above the roof surface to provide
convective air flow for ventilation.
- Splices safely extend rails.
- Standoffs
(optional), designed for standard flashing, support L-feet above tile
or shake roofs. A range of heights ensure a low profile. Clear or dark
finishes on all visible above-roof components, from L-feet to screw
heads, match the frames of your PV modules.
