Solar Chill 2424HP (1000 Sq. Ft.)

Solar energy and cooling go together like bread and butter.  The cooling capacity increases as the need for cooling increases.  They are a perfect match.   The SOLAR CHILL_tm is a perfect solution if you have "time of day metering" (higher electrical rates during the peak-daytime hours, and lower rates at night), because you will have even more opportunities to save on your utility bills.  The extremely low wattage of this product allows the SOLAR CHILL_tm to operate on just one or two PV panels during sunny conditions!  This reduces the payback period for a SOLAR CHILL_tm system to just 3 - 5 years.  The SOLAR CHILL_tm can be powered with solar, wind, or regular household energy sources, and may be used with or without batteries.  These coolers are available in 4 sizes: 1000 to 8000CFM, and 12 or 24 volts DC (48 VDC, 120 VAC, and 240VAC available by special order).

Where humidity is low, 110 Degree air is cooled to 75 F by evaporation (Less than 9% RH).  Eight Thousand BTU'S of cooling are available for each gallon of water evaporated!  Evaporation rates in the SOLAR CHILL_tm can range from 1 to 30 gallons per hour, depending on the model and humidity.   Traditional coolers use 3 or 4 pads with a thickness of 1 or 2", however, the SOLAR CHILL_tm uses only one pad that is 6" or 8" thick. This wetted pad can last up to 5 years, thus reducing maintenance costs while raising efficiency.   It is the most efficient pad media made.  Highly efficient, permanent magnet DC (direct current) motors replace the inefficient AC induction motors in standard coolers.   Minimal duct work (short and/or oversized), or direct discharge will guarantee maximum airflow and efficiency.  Please inquire with the manufacturer prior to replacing an existing cooler with a SOLAR CHILL_tm, prior to installing a SOLAR CHILL_tm for the first time.